Filter
Top Products
20
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place your document face down.
3
Align the document with the appropriate paper size marks.
•
If the document does not match any of the paper size marks, align the upper left
edge of your document with the arrow mark.
• If the document is a transparency, place white paper above the document.
A5
STMT
B5
A4
LTR
4
Close the feeder.
Placing Documents in the Feeder
1
Open the document feeder tray.
2
Spread the document guides a little wider than the document’s width.
When placing large documents, pull out the extension tray.
3
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
Align the edges a few
times on a at surface.
CAUTION
When closing the
fe
eder, be careful not to
get your ngers caught.