Filter
Top Products
6-4
Reports and Lists
6
■ ERROR TX REPORT
NOTE
The recipient's fax/telephone number (RECIPIENT ADDRESS) is not shown for the manually sent faxes.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [OK].
3
Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [OK].
4
Press [ (-)] or [ (+)] to select <TX REPORT> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].
You can select from the following:
- <PRINT ERROR ONLY> to print a report only when a transmission error occurs
- <OUTPUT YES> to print a report every time you send a document
- <OUTPUT NO> to disable printing the report
● If you selected <PRINT ERROR ONLY> or <OUTPUT YES>:
❑
You can set whether to print the first page of the fax under the report. Press [ (-)] or [ (+)] to select <OFF>
or <ON> ➞ press [OK].
- <OFF> to print no first page
- <ON> to print the first page
NOTE
Even if <REPORT WITH TX IMAGE> of <TX REPORT> setting is set to <ON>, the machine will not print the first
page of the fax when you fax the documents from your computer.
6
Press [Stop/Reset] to return to the standby display.
***************************
***************************
*** ***
ERROR TX REPORT
01/02 2005 17:21 FAX 1234567 CANON 001
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0005
RECIPIENT ADDRESS 20 545 8545
DESTINATION ID
ST. TIME 01/02 17:21
TIME USE 00'00
PAGES SENT 0
RESULT
NG
# 0018 BUSY/NO SIGNAL
Error code
Transmission time
Transmission duration
Number of pages sent
OK: Transmission successful
NG: Some or no pages sent
Transaction number
Recipient fax/telephone number
Registered name for speed dial
Error
description