Filter
Top Products
8-6
Machine Settings
8
4. MAN/AUTO SWITCH Sets whether the machine switches to the document
receive mode after the connected extension telephone
rings for a specified length of time in the manual receive
mode.
ON The machine switches to document receive mode after
the connected extension telephone rings for a specified
time.
F/T RING TIME Sets the length of time to elapse before the machine
switches to the document receiving.
1SEC to 99SEC (15SEC)
OFF The connected extension telephone keeps ringing until
someone answers the call manually.
5. REMOTE RX Enables/disables remote receiving.
ON The machine enables remote receiving.
REMOTE RX ID You can dial code on the remote extension to start
receiving a document.
A combination of two characters using 0 to 9, and #
is possible. The default character is 25.
OFF The machine disables remote receiving.
6. RX REDUCTION Receives images at a reduced size.
ON Image reduction is turned on.
1. RX REDUCTION AUTO SELECTION: Reducing size is set automatically.
FIXED REDUCTION: Reducing size is preset.
97%, 95%, 90%, 75%
2. SELECT REDUCE DIR VERTICAL ONLY: Reduction is performed in the
vertical direction only.
HORIZ & VERTICAL: Reduction is performed in the
horizontal and vertical direction.
OFF Image reduction is turned off.
7. TONER SUPPLY LOW Allows you to set how the machine responds when the
toner supply is low.
RX TO MEMORY The machine receives all documents in the memory.
KEEP PRINTING The keep printing function is turned on. With this
setting, the machine will not store documents in the
memory if the toner has run out. Re-set to <RX TO
MEMORY> after replacing the cartridge with a new one.
Name Descriptions