Filter
Top Products
Preparation for Protocol Settings
2-9
Specifying the Network Settings
2
[Gateway Address]: Enter the gateway address used for the TCP/IP
network.
[Subnet Mask]: Enter the subnet mask used for the TCP/IP network.
[Broadcast Address]: Enter the broadcast address used for the TCP/IP
network.
NOTE
•
The settings for [IP Address], [Gateway Address], [Subnet Mask], and [Broadcast
Address] cannot be entered if [DHCP] is selected from [IP Address Setting with].
•
If a DHCP server cannot be used, select [Manual Setting] from [IP Address Setting
with].
8
Confirm the settings you specified ➞ click [OK].
9
When the following message box appears, click [OK].
The settings are enabled after a short time.
The preparation for the machine’s protocol settings are complete.