Filter
Top Products
Network Setting Items
3-3
Appendix
3
Network Setting Items
Network Setting Items Using the Operation Panel
You can change the settings of the machine with the operation panel of the
machine. The setting items you can change are shown below.
■ NETWORK SETTINGS
Item Setting Description
Default
Setting
IP ADDRESS AUTO. ON/OFF (DHCP/BOOTP/RARP, ON/OFF) ON
IP ADDRESS IP address 0.0.0.0
SUBNET MASK Subnet Mask 0.0.0.0
DEFAULT GATEWAY Default Gateway address 0.0.0.0
SNMP SETTINGS SNMP settings (ON/OFF), Port No. settings ON (Port No. 161)
LPD SETTINGS LPD settings (ON/OFF), Port No. settings ON (Port No. 515)
USE HTTP HTTP settings (ON/OFF), Port No. settings ON (Port No. 80)
RAW SETTINGS RAW settings (ON/OFF), Port No. settings
ON
(Port No. 9100)
ETHERNET DRIVER
Ethernet driver settings (AUTO/MANUAL
(DUPLEX (HALF DUPLEX/FULL DUPLEX),
ETHERNET TYPE (10 BASE-T/100 BASE-
TX))
AUTO
COMMUNITY NAME
1
Community name settings public
COMMUNITY NAME
2
Community name settings (null)
SNMP WRITABLE 1 SNMP write settings (ON/OFF) ON
SNMP WRITABLE 2 SNMP write settings (ON/OFF) OFF