Filter
Top Products
Scanning from the Feeder
4-5
Scanning
4
4
Load the originals in the feeder.
Load the originals in the orientation specified in the Orientation dialog box, with the surface
to be scanned uppermost.
5
In the Network ScanGear Main Window, set the Color Mode,
Resolution, and other scan settings.
6
If necessary specify the scanning area, then click the Scan button.
Scanning starts.
The originals loaded into the feeder are scanned in succession.
IMPORTANT
•
Check that the originals are correctly loaded in the feeder.
•
When Scanning from the platen glass after using the feeder, make sure that the platen glass
cover is fully opened before positioning the original.
•
It is not possible to specify the scanning area when scanning 2-sided originals.