Filter
Top Products
5–22
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
10) Lead the other connector on the relay harness
through the copier’s bottom plate as shown.
Figure 5-617
11) Connect the connector on the relay harness
with the copier’s connector.
Figure 5-618
Copier's connector
Molded member
Copier's base plate
Relay harness
12) Fix the relay harness in place to the rear side
plate with the cord clamp.
• Cassette Feeding Unit-K1
Figure 5-619
Caution:
Make sure that the relay harness is outside the
are indicated by dashed lines to prevent it from
interfering with the feet of the cassette.