Filter
Top Products
5–29
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) Remove the two screws y, and detach the face
cover t from the copier’s rear cover.
Fig. 5-804
4) Open the ferrite core u, wind the RDD’s cable
i three times, and close the ferrite core u;
thereafter, connect the cable o on the copier
side and the RDD’s cable i.
Note:
If a conversion connector is found on the cable
!1 from the copier, remove it.
Fig. 5-805
Fig. 5-806
5) Fix the RDD in place on the copier’s rear cover
with four screws y; use the screws removed
from the copier.
Modular Jack on the Right
Fig. 5-807
y y
t
o
i
o
u
y
y