Filter
Top Products
171
Installation Manual Connecting to a Networ
k
Network Settings on the Projector
From the projector menus screen, network
settings can be configured in the [Network
Setting] tab. For the menu operations,
refer to page 88.
(The screen is for the WUX5000 /
WUX4000.)
Locking the Network Settings
You can lock / unlock the network settings
so that they cannot be changed and cancel
the lock.
MENU > [Network Setting] > [Network Setting
lock]
After the OK button is pressed to accept
your setting and the MENU button or the
EXIT button (WUX6000 / SX6000) is
pressed to close the window, the lock is
re-engaged. If you change the network
settings, be sure to continue operating
without closing the window.
• [Lock] is the factory default.
• For the default network password, refer to
page 173.
Unlock Cancels the lock and allows
other network settings to be
changed. The password must
be entered in order to cancel the
lock.
When [Unlock] is selected, the
window shown below appears.
Use the [] / [] / [] / [] but-
tons to enter the 4-digit pass-
word.
For the WX6000 / SX6000, num-
bers can be entered using the
numerical buttons on the remote
control.
Lock Lock the settings.