Filter
Top Products
39
Using the Setup Menu
5. Use the [S] and [T] keys to turn the power on password on or off.
6. Press the [ENTER] key.
To change the power on password
1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on
page 19. Select the “Detailed Settings” main menu, and then select
the “Change Password” sub-menu item.
2. Press the [ENTER] key.
z This displays a password input dialog box.
3. Input the current password.
z The initial factory default password is: [S][X][T][W][S][T][W][X].
z For information about how to input the password, see “Using the Password Input
Dialog Box”.
4. Press the [ENTER] key.
z If the password you input does not match the currently registered password, the
message “The password you input is wrong.” appears. Press the [ENTER] key to
return to step 1.
z If the password you input matches the registered password, pressing [ENTER] above
will display the message “The password you input is correct!”. Press the [ENTER]
key to advance to the next step.
5. Input the new password, and then press the [ENTER] key.
z This displays a dialog box for re-inputting the password for confirmation.
6. Re-input the same password you input in step 5, and then press
[ENTER].
z If the two passwords you input were identical, the message “Your new password has
been registered.” appears. Press the [ENTER] key.
z If the password you input here is different from the one you input in step 5, the
message “The password you input is wrong! Go back and input the correct
password.” appears. Pressing the [ENTER] key will display the new password input
dialog box. Repeat the above procedure from step 5.