Filter
Top Products
Terminal Setup
To set these addresses from the Settings menu, click on Servers and then click on Add.
Enter the name of each server, its IP Address and IP port (normally 23 for Telnet
servers), and emulation type. Then click on
OK.
Repeat this step for each telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
Edit button to make the corrections.
Setting Terminal Model and COM Port
The default terminal model is DT800, and the default serial connection to the Casio
cradle is through
COM1. To select a specific Casio terminal model and keypad, or to
change the
COM port assignment, click on the Options menu as shown.
The default terminal model,
DT800, represents the default setup for all Casio terminals
under PowerNet. To maintain compatibility with existing Casio Telnet client keyboard
layouts, a specific terminal model and keypad must be selected from the Terminal Model
window.
Supported Equipment Manual • March, 2006
2-6