Filter
Top Products
E-56
2. Remove the PC card slot cover.
3. Slide a PC card with a remover tape affixed into the Handheld Terminal.
Make sure that the top surface of the card is facing in the same direction as the
Handheld Terminal display. You will not be able to insert the card all the way into the
slot if it is not oriented correctly.
Be sure to fold the tab part of the remover tape affixed to the card so it is not
damaged when you replace the card compartment cover.
4. Replace the PC card compartment cover, and secure it in place with its screws.
Important!
If you cannot eject a PC card from the slot for some reason, carefully use a flat
blade screwdriver to pull out the lever located at the right of the card, as shown in
the illustration. While pulling out on the tab, pull the card from the slot. Never try
to pull on the tab with your fingernail. Doing so can cause your fingernail to break.
DT-X11_E_P53_59.p65 06.2.6, 4:41 PM56