Filter
Top Products
E-5
Disp
The display currently shows an intermediate result of a
multi-statement calculation.
Important: For some type of calculation that takes a long time to execute,
the display may show only the above indicators (without any value) while it
performs the calculation internally.
Using Menus
Some of the calculator’s operations are performed using menus. Pressing
or @, for example, will display a menu of applicable functions.
The following are the operations you should use to navigate between
menus.
• You can select a menu item by pressing the number key that corresponds
to the number to its left on the menu screen.
• The
indicator in the upper right corner of a menu means there is another
menu below the current one. The
> indicator means another menu above.
Use
A and D to switch between menus.
• To close a menu without selecting anything, press
.
Specifying the Calculation Mode
When you want to perform this type of
operation:
Perform this key
operation:
General calculations
(COMP)
Complex number calculations
(CMPLX)
Statistical and regression calculations
(STAT)
Calculations involving specific number
systems (binary, octal, decimal,
hexadecimal)
(BASE-N)
Equation solution
(EQN)
Matrix calculations
(MATRIX)
Generation of a number table based on an
expression
(TABLE)
Vector calculations
(VECTOR)
Note: The initial default calculation mode is the COMP Mode.
Configuring the Calculator Setup
First perform the following key operation to display the setup menu:
(SETUP). Next, use A and D and the number keys to configure
the settings you want.
Underlined ( ___ ) settings are initial defaults.
MthIO LineIO Specifies the display format.
Natural Display (MthIO) causes fractions,
irrational numbers, and other expressions to be
displayed as they are written on paper.