Filter
Top Products
39
Recording Images
With Motion Shutter the camera automatically triggers
a self-timer countdown whenever it detects subject
movement within a framed area you specify on the
monitor screen. This means you can control operation
of the self-timer from a distance by waving your hand,
so you can include yourself in the image being shot.
1. In the REC mode, touch the recording mode
icon (page 29).
2. Touch “l” (Motion Shutter).
3. Drag “ ” to the location in the image where you want movement to be
detected.
4. When everything is ready, press the shutter button all the way down.
Motion Shutter will go into standby to wait for trigger movement.
5. Facing the camera, move your hand or perform some other movement
in the area of the icon you positioned in step 3.
When the camera detects subject movement within the framed area, it will
automatically start a self-timer countdown. The camera will shoot an image when
the countdown reaches zero, and then go back into Motion Shutter standby to
wait for the next trigger movement.
NOTE
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.
• Motion Shutter exits standby automatically after it shoots six images.
• To cancel Motion Shutter standby at any time, press the shutter button.
• Motion Shutter may not operate properly when there is little difference in the color
of the subject and the color of the background enclosed by the boundary, or when
the subject is located far away from the camera, making it too small.
Using Motion Shutter to Trigger a Self-timer Operation
(Motion Shutter)