Filter
Top Products
103
7. Use K and L to move the entry you want to send into the second line of the
display.
• You cannot send Reminder Mode data listed under a Schedule Keeper date.
Use the procedure on page 102 to send a single Reminder Mode data item.
8. Press
DISP CHNG to switch to the data display of the selected entry.
9. Press
SET to start the send operation or ESC to abort the operation without
sending anything.
• To abort the send operation at any time, press
ESC.
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
10
. To interrupt a data transfer operation, press ESC.
To send one month of Calendar data (highlights)
1. In the Calendar Mode, press FUNC twice to display the second function
menu.
2. Press
4 to select DATA COMM.
3. Press
1 to select SEND.
4. Press
1 to select MONTH.
5. Display the calendar whose highlights you want to send.
• Use
K and L to scroll through the calendar.
6. Press
SET to start the send operation or ESC to abort the operation without
sending anything.
• If the corresponding calendar in the receiving unit already contains high-
lighted dates, the received data is ignored. You have to clear the correspond-
ing data in the receiving unit before it can receive highlight data.
• To abort the send operation at any time, press
ESC.
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
7. To interrupt a data transfer operation, press
ESC.
To send all Telephone Directory, Memo Mode, To Do Mode, or
Reminder Mode data
1. In the Telephone Directory, Memo Mode, To Do Mode, or Reminder Mode,
press
FUNC twice to display the second function menu.
• You can perform the following operation while in the open memory area
or the secret memory area.
2. Press
4 to select DATA COMM.
3. Press
1 to select SEND.
4. Press
2 to select MODE DATA.
Sending Data