Filter
Top Products
Advanced Operations
TE-8000F/8500F User’s Manual
81
E
Programming descriptors and messages
Programming item descriptor (flat-PLU) procedure
Step 1. Press <PGM MODE> two times to turn “PGM-2”, select “1.Item Descriptor” and press `.
Step 2. Select “1.PLU” and press
`.
Step 1. screen Step 2. screen
Step 3. Select the PLU record you want to program by pressing the flat-PLU key directly, by entering PLU record
No. and
`, or by entering random PLU code and +.
Step 4. Enter characters and `.
Step 3. screen Step 4. screen
Step 5. Repeat the step 4., if you program the next record.
Press \ and repeat the step 3. and 4., if you program to the other record.
Step 6. Press
\ repeatedly to return to the “Step 1. screen”.
P2
C
01 10-10-02 12:34 000123
PGM-2
1.Item Descriptor
2.Char & Message
0.00
Item Descriptor
Item Descriptor
1.PLU
2.PLU 2nd@
3.Sub-Department
4.Department
5.Range
6.PLU -> 2nd@ Copy
7.Char & Press key
8.Pulldown Group
0.00
Item Descriptor
PLU
1.PLU0001
2.PLU0002
3.PLU0003
4.PLU0004
5.PLU0005
6.PLU0006
7.PLU0007
8.PLU0008 ´
0.00
No. Descriptor
5 PLU0005
6 PLU0006
7 PLU0007
8 PLU0008
9 PLU0009
10 PLU0010
11 PLU0011
12 PLU0012
13 PLU0013
14 PLU0014
15 PLU0015 ´
PLU0005