Filter
Top Products
11
E
TK-3200 User's Manual
Getting Started
Loading receipt paper
The same type of paper (45 mm × 83 mm i.d.) is used for receipts and journal. Load the new paper
before first operating the cash register or when red paper appears from the printer.
Step 1
Use a mode key to set the
mode switch to REG1
position.
Step 2
Open the printer cover.
Step 3
Cut off the leading end of
the paper so it is even.
Step 5
Drop the paper roll gently
and insert paper to the
paper inlet.
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 6
Press the f key until
about 20 cm to 30 cm of
paper is fed from the
printer.
Complete
Set the printer cover,
passing the leading end of
the paper through the paper
outlet. Close the printer
cover and tear off the
excess paper.
Important!
Never operate the cash register without paper. It can damage the printer.