Filter
Top Products
110
E
User Maintenance
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Step 2
Press j to feed about 20
cm of paper.
Step 3
Cut the journal paper at the
point where nothing is
printed.
Step 4
Remove the journal take-up
reel from its holder.
Step 5
Slide the printed journal
from the take-up reel.
Step 6
Cut the journal paper as
shown in the photograph.
Step 7
Press j to feed the
remaining paper from the
printer.
Step 8
Do not pull the paper out
of the printer by hand. It
can damage the printer.
Step 9
Remove the old paper roll
from the cash register.
Step 10
Load new paper as
described on page 12 of
this manual.
Step 1
Set the mode switch to the
REG1 position and remove
the printer cover.
To replace journal paper