Filter
Top Products
26
Note
z While “Off” is selected for the Eco Mode setting, you also can specify whether brightness or
color should be given emphasis. For details, see “Eco Off Mode” (page 39) under “Image
Adjustment 1 Main Menu”.
z (for USB port model users)
Use the setup menu (page 27) to select the Eco Mode when the input source is an external
device connected to the USB-A port.
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
z Adjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
z Turn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
z Select the aspect ratio of the projected image
Highlight “Aspect Ratio” and then press the [ENTER] key.
Note
(for USB port model users)
When the input source is an external device connected to the USB-A port, use the [FUNC], [O],
[
f
], and [
Z
] keys to control the connected device. For details, see the “USB Function Guide”
and “Wireless Function Guide”.
Using the [FUNC] Key
J This performs the same operation as pressing the [BRIGHT] key (O key) described on page 19.
J This performs the same operation as pressing the [ECO] key (
f
key) described on page 25.
J This performs the same operation as pressing the [ASPECT] key (
Z
key) described on page 23.