Filter
Top Products
46
Option Settings 2 Main Menu
Setting Name Input Setting Unit Description
Pointer
RCVHDUN
Single Use this sub-menu to specify the type of pointer that appears first
when you press the [POINTER] key.
Plug and Play
(USB port
models only)
RCVHDUN
Single Use this sub-menu to turn plug-and-play on or off.
On*:
Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.
Off:
Select this option to turn off plug-and-play.
Note
z For details about plug-and-play, see the “USB Function
Guide”.
z Regardless of the setting of this item, plug-and-play is
disabled while the projector is in the 3D input mode (“3D
Input Mode”, page 17) or “On” is selected for the “Option
Settings 2 J Interactive Pointer” setting.
Audio Out
RCVHDUN
Single Specifies whether the input audio signal should be output from the
projector’s built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the projector from the
speaker.
Line:
Outputs the audio signal being input to the projector from the
AUDIO OUT terminal.
High Altitude
RCVHDUN
Single Use this sub-menu to turn the high-altitude fan speed setting on or
off in accordance with the altitude of the area where you are using
the projector.
On:
Select this setting when using the projector in a high altitude
(1,500 to 3,000 meters above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*:
Select this setting at normal altitudes (up to 1,500 meters).
Important!
Do not use this projector at altitudes greater than
3,000 meters above sea level.
Control Panel
Lock
RCVHDUN
Single Use this sub-menu to disable (lock) and enable (unlock) the
projector’s control panel.
On:
Select this setting to disable (lock) all projector key operations
except for [P] (Power).
Off*:
Select this setting to enable (unlock) projector key operations.
Custom Logo
Capture
RCVHDU
Single See “Custom Logo Capture” (page 30).