Filter
Top Products
Monitoring System Status
5-5
2
From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window displays.
3
Enter the path and file name you want to use to store the log file contents.
4
Click Start.
5
Press P on the keyboard to begin the transfer.
6
From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window displays.
7
Click Stop.
Displaying Hardware and Configuration
Information
You can display the controller’s hardware and configuration information. This is
where you can see what version of the firmware you have. Chaparral technical
support personnel may request this information.
You can display the hardware and configuration information two ways:
!
Hardware information only
!
Hardware and configuration information
Table 5-1 lists the configuration information that is available.
Table 5-1. Configuration information
Group Field What displays Field What displays
HOST Enabled Field is just a
placeholder.
SE/LVD
(K5312 and
G5312 only)
Negotiation rate.
Target ID SCSI ID of
controller as set in
the Disk Array
Administrator
software.