Filter
Top Products
Configuring the Controller
7-7
– Any number between 0 and 7—Select a specific number if you want the
controller’s LUN to stay the same when you reboot.
To change the controller’s target ID and LUN:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Host Configuration and press Enter.
The Host Configuration screen displays.
3
Select Target ID and press Enter.
The Target ID screen displays.
4
Select the option or number you want to use and press Enter.
To Do this
Set a SCSI Target ID
! Select the [target ID] you want to
use and press Enter.
This can be any number from 0 to
15.
FC Loop ID
Let the FC loop initialization
process determine the Loop ID for
the channel each time the
controller powers up
!
Select SOFT and press Enter.
This is the default setting.