Filter
Top Products
G- and K-Series User’s Guide
7-2
Caution:
Anyone accessing an array when you shut down the controller
will lose access and may lose data.
To shut down and restart the controller:
1
From the System Menu, select Shutdown/Restart and press Enter.
The system confirms that you want to shut down.
2
Select Yes and press Enter.
The system confirms that it has shut down.
3
Press Enter to reboot.
The system performs its self-test. When you see the Disk Array Administrator
initial screen, the controller is ready. See Chapter 3,
Accessing the Disk Array
Administrator Software.
Changing the Date and Time
You can change the controller’s date and time.
To set the controller’s date:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Set Date/Time and press Enter.
The Set Date/Time screen displays.
!