Filter
Top Products
G- and K-Series User’s Guide
I-2
C
cache
disabling for disk drives 8-5
enabling for disk drives 8-5
locking setting on controller 7-20
Cache Lock screen 7-21
capacity, expanding for arrays 4-18
capturing, the event log file 5-4
Change Array Name 4-22
Change LUN 4-21
Change Zone Type 7-16
Channel Configuration screen 7-9
channels
changing SCSI ID 7-9
changing SCSI speed 7-9
configuring for SCSI 7-9
rescanning 7-23
Chaparral technical support 9-1
Chunk Size screen 4-6
Clear Metadata 8-5
communications parameters 3-2
configuration information
defined 5-5
displaying 5-5
Configuration Information screen 5-10
configuration software, accessing 3-1
configuring
SCSI channels 7-9
the controller 7-1
connecting
to the FC port 2-1
to the RS-232 port 2-2
Controller
LUN for 7-5
controller
changing FC Loop ID for 7-6
changing LUN 7-6
changing target ID 7-6
changing the sample rate 7-17
changing utility priority 7-22
configuring 7-1
connecting to the FC port 2-1
connecting to the RS-232 port 2-2
disabling the battery 7-21
displaying configuration information 5-5
displaying events 5-1
displaying hardware information 5-5
enabling the battery 7-21
locking the cache setting 7-20
monitoring status of 5-1
rebooting 7-1
rescanning channels 7-23
restoring defaults 7-25
setting the date and time 7-2
turning the alarm or off 7-18
understanding LUNs for 7-4
upgrading firmware 7-26
controller problems 9-5
conventions 1-2
creating arrays 4-1
customer support 9-1
D
data
status of verifying 4-16
stopping verify process 4-17
verifying 4-15
date, setting 7-2
dedicated spares
adding 6-2
defined 6-1
deleting 6-3
default settings, restoring 7-25