Filter
Top Products
Page 10 of 29 Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1
Mounting
Before mounting the product, read and follow the safety recommendations in the Safety
Notes section.
Orientation
The Intimidator™ Wash Zoom 250 IRC can be mounted in any position, but make sure
the placement allows adequate ventilation for the product
, and allows for movement of
the yoke and head in any direction.
Rigging
Be sure to place the product in a location that allows easy access to it for maintenance
and programming, and enough space around the product for ventilation.
Make sure that the structure or surface onto which the product will be mounted can
support the product’s weight. For more information see the Technical Specifications
section.
When mounting the product overhead, always use a safety cable
and make sure the
product is attached securely.
When mounting the product on a truss or pipe, use a mounting clamp with the
appropriate weight capacity. CHAUVET® has a full range of mounting clamps. See
http://www.chauvetlighting.com/cables-clamps-main.html
for the complete selection.
The rubber feet serve as floor supports. When placing the product
on the floor, make
sure that the product and cables are away from people and vehicles.
Mounting
Diagram
Safety Cable
(such as CH-05 from
CHAUVET®)
Mounting Clamp
(such as CLP-15 or CLP-15N from CHAUVET®)
Threaded Mounting Hole
size M12 on bottom panel
Handles on
both sides
Fan and Ventilation Slots
(ensure adequate space for
ventilation)
Secure the safety cable
using the pass-
through on
the bottom of the product