Filter
Top Products
Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1 Page 5 of 29
Product at a
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
These notes include important information about the mounting, use, and maintenance of
this product. Read these notes before using the product.
· Always connect the product to a grounded circuit to avoid the risk of electrocution.
· Make sure the power cord is not crimped or damaged.
· Always disconnect the product from the power source before cleaning it or replacing
the fuse.
· Never disconnect the product from the power source by pulling or tugging on the
cord.
· If mounting the product overhead, always secure it using a safety cable.
· Make sure there are no flammable materials close to the product when it is
operating.
· Avoid direct eye exposure to the light source while the product is on.
· Do not touch the product’s housing when the product is operating because the
housing can be very hot.
· This product is not intended for permanent installation.
· The product is for indoor use only! It is rated at IP20.
· To prevent risk of fire or shock, do not expose the product to rain or moisture.
· Always make sure that the voltage of the power source to which the product is
connected is within the range stated on the sticker or rear panel of the product.
· Never connect the product to a dimmer or rheostat.
· Make sure to replace the fuse with another of the same type and rating.
· Always install the product in a location with adequate ventilation, and leave at least
20 in (50 cm) between the product and adjacent surfaces.
· Always use the handles to carry this product.
· The maximum ambient temperature (Ta) in which the product can be used is
104 °F (40 °C). Do not operate the product at higher temperatures.
· Be sure that no ventilation slots on the product’s housing are blocked.
· Never carry the product by the power cord or any moving part.
· In the event of a serious operating problem, stop using the product immediately.
· Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
Keep this User Manual for future reference. If you sell the product to another user, be
sure to give this manual to the next owner.