Filter
Top Products
Page 22 of 29 Intimidator™ Wash Zoom 250 IRC User Manual Rev. 1
Configuration
(Settings)
The Intimidator™ Wash Zoom 250 IRC can be customized with settings such as for
movement, speed, display, and fan operation. Below are instructions for all the settings
available in the
Setup menu.
Pan Reverse
Reversing the pan movement is useful when 2 lights are facing each other and they both
need to turn toward the same direction.
To reverse the pan movement do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> and <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> and <DOWN> to highlight the Pan Reverse option.
5. Press <ENTER>. The words ON or OFF will show in green.
6. Use <UP> or <DOWN> to switch between ON and OFF.
7. Press <ENTER> to select the setting.
Tilt Reverse
Reversing the tilt movement is useful when 2 lights are facing each other and they need
to point towards the same space between them.
To reverse the tilt movement do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> and <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> and <DOWN> to highlight the Tilt Reverse option.
5. Press <ENTER>. The words ON or OFF will show in green.
6. Use <UP> or <DOWN> to switch between ON and OFF.
7. Press <ENTER> to select the setting.
Pan Range
Setting the pan angle range is useful when there is an area of the room that the
Intimidator™ Wash Zoom 250 IRC should not illuminate.
To set the range of the Pan movement, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use the <UP> and <DOWN> buttons to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use the <UP> and <DOWN> buttons to highlight the Pan Angle option.
5. Press <ENTER>. The three digits to the right will show in green.
6. Use <UP> or <DOWN> to select 180, 360, or 540.
7. Press <ENTER> to select the setting.
Tilt Range
Setting the tilt angle range is useful when there is an area of the room that the
Intimidator™ Wash Zoom 250 IRC should not illuminate.
To set the range of the tilt movement, do the following:
1. Press <MENU> repeatedly until 4 icons show on the display.
2. Use <UP> and <DOWN> to highlight the Setup icon.
3. Press <ENTER>. The Setup options will show on the display.
4. Use <UP> and <DOWN> to highlight the Tilt Angle option.
5. Press <ENTER>. The three digits to the right will show in green.
6. Use <UP> or <DOWN> to select 90, 180, or 270.
7. Press <ENTER> to select the setting.