Filter
Top Products
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 3: Installation
3-11
3.9 Stacking Installation
3.9.1 Adapter Plate Installation
When stacking E Series projectors, an adapter plate is required to install the E
Series unit into the stacking frame.
Turn the projector OFF and disconnect the AC power cord after the cooling 1.
fans have stopped.
Place the projector top-side down on a clean and at surface.2.
Line up the mounting holes of the adapter plate (133-107109-02) with the 3.
mounting holes on the baseplate of the projector.
Secure the adapter plate with 4 M6x25 athead screws. Torque to 41 in-lb.4.
Adapter Plate Attachments
Bottom View
Mounting
All attachment
points to be
secured
3.9.2 Stacking
The E Series projectors can be stacked up to a maximum of 3 projectors high
using the Christie stacking frame (118-100107-01).
Description
1) Base Plate
2) Locking pin
3) Cable Tie-off Frame
4) Stacjing Leg
5) Locking Nut
6) Knob
Frame Weight = 50 Ibs (22.68 kg)
Adapter Plate Weight = 3.26 Ibs (1.48 kg)
Projector Weight = 43 Ibs (19.50 kg)
Lens Weight (up to) = 5.43 Ibs (2.46 kg)
Up to = 101.69 Ibs (46.12 kg)
(per projector and frame)
+/- Yaw
+/- Pitch
+/- Roll