Filter
Top Products
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 4: Operation
4-24
4.9.5 Network
SettingsPage
Restart Network
y
Execute a network restart. This will not change any of the network -
settings.
Network Factory Reset
y
Execute a network factory reset. Network settings will be reset to the
following default values:
Projector Name = Christie@ + Serial Number -
Show Network Messages = ON -
LAN Settings: -
Manual -
IP Address = 192.168.0.100 -
Subnet Mask = 255.255.255.0 -
Default Gateway = 192.168.0.100 -
WLAN Settings: -
Enabled -