Filter
Top Products
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 2: Introduction
2-2
Ind. Part Name Description
1 Lens door Use the lens door to access the lens module.
2 Front IR Sensor
Receives signals from the IR remote. Keep the signal
path to the sensor unobstructed for uninterrupted
communication with the projector.
3 Projection Lens
Allows automated lens control and adjustment: vertical
and horizontal offsets, zoom and focus.
4 Cooling Air Vents
Keep these vents unobstructed to prevent the projector
from overheating.
5 Adjustable Feet Raise or lower the feet to level the projector.
6 LED Status Indicators
Displays the status of the projector. They are (from left
to right): LAMP 1, LAMP 2, STATUS and PIC MUTE.
7 Rear IR Sensor
Receives signals from the IR remote. Keep the signal
path to the sensor unobstructed for uninterrupted
communication with the projector.
8 Lamp Door (Screws) Use the lamp to access to the lamp module.
9 Built-in Keypad Controls the projector.
10
Input/Output (I/O)
Panel
Connects the projector to external devices.