Filter
Top Products
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 5: Troubleshooting
5-3
Problem Solution
Image is out of
y
focus
Make sure both lens caps (front and back) are removed.
-
Adjust lens focus to t.
-
Make sure the projection screen is between the required
-
distance.
The image is
y
stretched when
displaying 16:9
DVD title
When you play anamorphic DVD or 16:9 DVD, the
-
projector will show the best image when the projector
display mode is set to 16:9 in the OSD.
If you play 4:3 format DVD titles, please change the format
-
to 4:3 in the projector OSD.
If the image is still stretched, you will also need to adjust
-
the aspect ratio by setting the display format as 16:9 (wide)
aspect ratio type on your DVD player.
Image is too small
y
or too large
Adjust lens zoom to t.
-
If it does not ll the screen properly, verify that the correct
-
lens is in use or change the position of the projector.
Lamp burns out or
y
makes a popping
sound
If the lamp burns out, try power cycling the projector. If
-
the lamp doesn't re or if you hear it make a loud pop, the
projector will not turn on until the lamp module has been
replaced.