Filter
Top Products
E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 1: Safety
1-2
Always power down the projector and disconnect all power sources before
y
servicing or cleaning.
Use a soft cloth moistened with a mild detergent to clean the display
y
housing.
Disconnect the power plug from the AC outlet if the product is not being
y
used for an extended period of time.
Operate the projector under the following conditions:
y
Operating temperature range: 5°C to 35°C
-
Storage temperature range: -10°C to 60°C
-
Humidity range: 5% to 80 % RH (Max.), non condensing
-
Operating altitude: 10,000 ft. maximum
-
Use only the AC power cord supplied. Do not attempt operation if the AC
y
supply and cord are not within the specied voltage and power range for
your region.
Remove the lens plug from the lens opening in the projector before
y
installing the lens. Retain the lens plug to protect the optical components
from dust and debris during transport.
Do not block the ventilation slots and openings on the projector.
y
Do not use abrasive cleaners, waxes or solvents to clean the projector.
y
Do not allow anything to rest on the power cord.
y