Filter
Top Products
1-27
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
1Cisco Nexus 2224TP
Note The N2K-C2232TF-10GE includes 16 Cisco FEX Transceivers (FET-10G=)
SFP+ Copper Cables
Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver. Table 1-17
lists the available cables and provides a brief description of the cables.
1Cisco Nexus 2224TP
The Cisco Nexus 2224TP is a stackable 1 RU FEX. This FEX is very similar to the Cisco Nexus 2248TP
except that it has 24 100/1000BASE-T downlink ports, 2 SFP+ uplink ports and you can order it with
front-to-back airflow or back-to-front airflow. You can use this FEXwith the Cisco Nexus 5000 Series
switch. The Cisco Nexus 2224TP is managed and configured by the upstream switch. The FEX software
ships with the Cisco Nexus 5000 Series switch software. The FEX downloads the software image from
the switch the same way that a module would download it from the supervisor in a modular chassis.
This section includes the following topics:
• Chassis, page 1-28
• Ports, page 1-29
• Power Supplies, page 1-29
• Fan Tray, page 1-30
• Supported SFP+ Transceivers, page 1-30
Table 1-17 Copper Cables for the Cisco Nexus 2232TM-10GE FEX
Model Description
SFP-H10GB-CU1M 10-Gigabit BASE-CU SFP+ Passive Cable
(1 meter)
SFP-H10GB-CU3M 10-Gigabit BASE-CU SFP+ Passive Cable
(3 meters)
SFP-H10GB-CU5M 10-Gigabit BASE-CU SFP+ Passive Cable
(5 meters)
SFP-H10GB-CU7MA 10-Gigabit BASE-CU SFP+ Active Cable
(7 meters)
SFP-H10GB-CU10MA 10-Gigabit BASE-CU SFP+ Active Cable
(10 meters)