Cisco Systems 2000 Switch User Manual


 
Send documentation comments to nexus5kdocs@cisco.com
2-28
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Cisco Nexus 2224TP FEX
DC power supply with front-to-back airflow (N2200-PDC-400W)
DC power supply with back-to-front airflow (N2200-PDC-350W-B)
For information on these power supplies, see the “Power Supplies for the Cisco Nexus 2248TP FEX”
section on page 2-13 and the power supply specifications in the “Power Specifications” section on
page B-1. To replace one of these power supplies, see the “Removing and Installing Power Supplies”
section on page 3-17.
Fan Tray for the Cisco Nexus 2224TP FEX
The Cisco Nexus 2224TP, 2248TP, and 2248TP-E FEXs use the same fan tray that you can order with
either front-to-back airflow (N2K-C2248-FAN) or back-to-front airflow (N2K-C2248-FAN-B).
For information on this fan tray, see the “Fan Tray for the Cisco Nexus 2248TP FEX” section on
page 2-14 and the fan tray specifications in the “Environmental Specifications” section on page B-4 and
the “Physical Specifications” section on page B-5. For LED descriptions, see Table D-1 on page D-2. To
replace one of these fan trays, see the “Removing and Installing the Fan Tray” section on page 3-20.
Transceivers and Connectors Supported by the Cisco Nexus 2224TP FEX
The Cisco Nexus 2224TP FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to four fabric uplink connections to Cisco Nexus 7000 Series switches, and
it supports RJ-45 connectors for up to 48 downlink connections to hosts. For each uplink cable, you must
use the same transceiver on both ends. Table 2-2 lists the transceivers supported by this FEX for its
uplink fabric .
Figure 2-10 on page 2-10 shows the SFP+ optical transceiver used for uplink connections. For
specifications that apply to these optical transceivers, see the “SFP+ Optical Transceiver Specifications”
section on page B-6.
Table 2-10 Supported Transceivers and Connector for the Cisco Nexus 2224TP FEX Uplink Interfaces
Transceiver or
Connector
Cable
Type
Fabric
Interface
(Uplink)
Host
Interface
(Downlink) Comments
FET-10G Optical X 10 Gbps FEX transceiver
SFP-10G-LR Optical X 10 Gbps long range transceiver (up to 6.2 miles [10 km])
SFP-10G-SR Optical X 10 Gbps Short range transceiver (up to 984 feet [300 m])
SFP -H10GB-CU1M Copper X 10 Gbps Twinax, passive transceiver (3.3 feet [1 meter])
SFP -H10GB-CU3M Copper X 10 Gbps Twinax, passive transceiver (9.8 feet [3 meters)
SFP -H10GB-CU5M Copper X 10 Gbps Twinax, passive transceiver (16.4 feet [5 meters])
SFP -H10GB-ACU7M Copper X 10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
SFP -H10GB-ACU10M Copper X 10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
RJ-45 Copper X 100/1000 Mbps Connector