Filter
Top Products
Contents
iv
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Changing the Command History Buffer Size 2-6
Recalling Commands 2-6
Disabling the Command History Feature 2-7
Using Editing Features 2-7
Enabling and Disabling Editing Features 2-7
Editing Commands through Keystrokes 2-8
Editing Command Lines that Wrap 2-9
Searching and Filtering Output of show and more Commands 2-10
Accessing the CLI 2-10
Accessing the CLI through a Console Connection or through Telnet 2-11
CHAPTER
3 Assigning the Switch IP Address and Default Gateway 3-1
Understanding the Boot Process 3-1
Assigning Switch Information 3-2
Default Switch Information 3-3
Understanding DHCP-Based Autoconfiguration 3-3
DHCP Client Request Process 3-4
Configuring DHCP-Based Autoconfiguration 3-5
DHCP Server Configuration Guidelines 3-5
Configuring the TFTP Server 3-6
Configuring the DNS 3-6
Configuring the Relay Device 3-7
Obtaining Configuration Files 3-7
Example Configuration 3-8
Understanding DHCP-based Autoconfiguration and Image Update 3-10
DHCP Autoconfiguration 3-10
DHCP Auto-Image Update 3-10
Limitations and Restrictions 3-10
Configuring the DHCP Auto Configuration and Image Update Features 3-11
Configuring DHCP Autoconfiguration (Only Configuration File) 3-11
Configuring DHCP Auto-Image Update (Configuration File and Image) 3-12
Configuring the Client 3-13
Manually Assigning IP Information 3-14
Configuring Protected Mode 3-15
Understanding Protected Mode 3-15
Configuration Guidelines and Restrictions 3-16
Enabling Protected Mode 3-16
Checking and Saving the Running Configuration 3-17
Modifying the Startup Configuration 3-18