Filter
Top Products
4-2
Cisco TelePresence System
OL-16441-01
Chapter 4 Options for the Cisco TelePresence System 3200
Cisco TelePresence Presentation Codec
c. Scroll down to the IP Address listing and copy the address.
Step 2 Open a browser on a computer that is connected to the network.
Step 3 In the URL field, type the IP address for the primary codec and press Enter. The browser launches the
Cisco TelePresence System Administrator.
Step 4 Log in to the system by entering the following information:
a. In the Admin field, type admin.
b. In the Password field, type cisco.
Note If your administrator has changed the user name or password, enter those values.
Step 5 Click Login.
Step 6 Locate the Phone pane in the upper left-hand corner of the administrator page and select
Troubleshooting > System Reset. the Restart Cisco TelePresence System button appears at the top of
the window.
Step 7 Click the Restart Cisco TelePresence System button to start the reset.
Six boxes appear on the display screens.
Step 8 After the first box changes to a check mark, turn the power switches for the two left PDUs and single
right PDU to the Off position.
Note There might be an additional PDU to power off that is mounted on the rear of the center display structure.
Caution Make sure all system power is turned off before beginning this disassembly.
Figure 4-1 PDU Location
Power
201185