Filter
Top Products
14-12
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 14 Configuring Auto Smartports Macros
Configuring Auto Smartports
Beginning in privileged EXEC mode:
Use the no shell t
rigger identifier global configuration command to delete the event trigger.
This example shows how to map a user-defined event trigger called RADIUS_MAB_EVENT to the
b
uilt-in macro CISCO_AP AUTO_SMARTPORT, replace the default VLAN with VLAN 10, and how
to verify the entries.
a. Connect the device to a MAB-enabled switch port.
b. On the RADIUS server, set the attribute-value pair to auto-smart-port=RADIUS_MAB_EVENT.
c. On the switch, create the event trigger RADIUS_MAB_EVENT.
d. The switch recognizes the attribute-value pair=RADIUS_MAB_EVENT response from the
RADIUS server and applies the macro CISCO_AP_AUTO_SMARTPORT.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# !!! create a user
defined trigger and map
Switch(config)# !!! a system defi
ned macro to it
Switch(config)# !!! first create
the trigger event
Switch(config)# shell trigger RAD
IUS_MAB_EVENT MAC_AuthBypass Event
Switch(config)#
Switch(config)#!!! map a system d
efined macro to the trigger event
Switch(config)# macro auto execut
e RADIUS_MAB_EVENT builtin ?
_ CISCO_DMP_AUTO_SMARTPORT
_ CISCO_IPVSC_AUTO_SMARTPORT
CISCO_AP_AUTO_SMARTPORT
CISCO_LWAP_AUTO_SMARTPORT
CISCO_PHONE_AUTO_SMARTPORT
CISCO_ROUTER_AUTO_SMARTPORT
CISCO_SWITCH_AUTO_SMARTPORT
LINE <cr>
Switch(config)# macro auto execut
e RADIUS_MAB_EVENT builtin CISCO_AP_AUTO_SMARTPORT
ACCESS_VLAN=10
Switch(config)# exit
Switch# s
how shell triggers
User defined triggers
---------------------
Trigger Id: RADIUS_MAB_EVENT
Trigger description: MAC_AuthBypass Event
Trigger environment:
Trigger mapping function: CISCO_AP_SMARTPORT
<output truncated>
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
shell trigger identifier description Specify the event trigger identifier and description. The identifier should
have no spaces or hyphens between words.
Step 3
end Return to privileged EXEC mode.
Step 4
show shell triggers Display the event triggers on the switch.
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.