Filter
Top Products
Cisco Active Network Abstraction Administrator’s Guide, 3.5
Page 64 Cisco Systems, Inc.
The following dropdown lists are displayed in the Filter dialog box:
• Field: Displays a dropdown list of all the columns displayed in the
current table.
• Operator: Displays a dropdown list of the values included in the
filter operation.
The following checkbox is displayed in the Filter dialog box:
• Not: Select this checkbox to filter the negative of the value in the
Operator field. For example, if the Not checkbox was selected in
the Filter dialog box, the filter operator would be the equivalent of
“does not contain”.
The following free text area is displayed in the Filter dialog box:
• Search for: Enter the required filter value.
2. Select an option from the Field and Operator dropdown lists.
3. Enter the required filter values in the Search for field.
4. Click OK. The information is displayed in the Workspace using the
defined filter.
Note: The Filter button toggles to indicate that a filter has been
applied.
The filter can be cleared in order to display all the data in the table again.
To clear a filter
1. In the toolbar, click Filter
. The Filter dialog box is displayed.
2. Click Clear. The Workspace displays all of the data.
Important Note: Use the Clear filter option to clear ALL of the filter
settings (refer to the note in the Setting Selection Filters section on
page 65).