Filter
Top Products
2-987
Catalyst 6500 Series Switch Command Reference—Release 7.6
78-15328-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show snmp access
There are three versions of SNMP:
• Version 1 (SNMPv1)—This is the initial implementation of SNMP. Refer to RFC 1157 for a full
description of functionality.
• Version 2 (SNMPv2c)—The second release of SNMP, described in RFC 1902, has additions and
enhancements to data types, counter size, and protocol operations.
• Version 3 (SNMPv3)—This is the most recent version of SNMP and is fully described in RFC 2571,
RFC 2572, RFC 2573, RFC 2574, and RFC 2575. SNMPv3 has significant enhancements to
administration and security.
The SNMP functionality on the Catalyst enterprise LAN switches for SNMP v1 and SNMP v2c remains
intact; however, the functionality has greatly expanded for SNMPv3. Refer to the “Configuring SNMP”
chapter of the Catalyst 6500 Series Switch Software Configuration Guide for more information on
SNMPv3.
The read-only keyword is supported for security model v3 only.
Examples This example shows how to display all SNMP access information:
Console> (enable) show snmp access
Group Name:defaultROgroup
Context:
Security Model:v1
Security Level:noauthentication
Context Match:vlan-1
Read View:defaultAdminView
Write View:
Notify View:defaultAdminView
Storage Type:read-only
Row Status:active
Group Name:defaultROgroup
Context:
Security Model:v2c
Secuirty Level:noauthentication
Context Match:vlan-55
Read View:defaultAdminView
Write View:
Notify View:defaultAdminView
Storage Type:read-only
Row Status:active
Related Commands clear snmp access
set snmp access
show snmp context