Filter
Top Products
Index
IN-16
Catalyst 6500 Series Switch Command Reference—Release 7.6
78-15328-01
mapping IP precedence-to-DSCP 2-467
returning to factory-set CoS defaults 2-73
returning to factory-set default for all packets arriving
through untrusted port
2-73
returning to factory-set default values 2-78
returning to factory-set threshold, queue, and threshold
map defaults
2-78
setting CoS values 2-469
setting default for all packets arriving through untrusted
port
2-421
setting DSCP-to-CoS map 2-466
setting packet buffer memory 2-481, 2-488
setting packet value 2-421
setting policy source to COPS-PR 2-477
setting policy source to local NVRAM 2-477
setting port policy source 2-417
setting port policy source to COPS 2-422
setting port policy source to local NVRAM 2-422
setting switch to participate in DSBM election 2-428
setting trusted state 2-424
specifying CoS-to-DSCP map 2-463
specifying interface as port or VLAN 2-417
specifying WRED threshold 2-490
specifying WRR weights 2-492
turning off 2-446
turning on 2-446
turning QoS on 2-446
turning QoS RSVP off 2-479
turning QoS RSVP on 2-479
QoS access lists
attaching to interface
2-459
defining IP access lists 2-449
defining IPX access lists 2-454
defining MAC access lists 2-457
QoS ACL
attaching ACL to interface
2-459
clearing changes to ACL edit buffer 2-192
committing to NVRAM 2-140
defining default action 2-447
defining IP access lists 2-449
defining IPX access lists 2-454
defining MAC access lists 2-457
detaching ACL 2-76
displaying ACL management information 2-941
displaying ACL names in edit buffer 2-936
displaying committed access lists 2-705
displaying configuration file location 2-698
displaying configured ACE information 2-937
displaying default action 2-937
displaying QoS ACL mapping 2-939
displaying running configuration 2-970
displaying runtime ACE information 2-937
displaying VLAN-bridged packet-policing status 2-942
removing ACE 2-76
removing default actions 2-76
removing IP ACE default actions 2-76
removing IPX ACE default actions 2-76
removing MAC-layer ACE default actions 2-76
QoS policing
clearing aggregate rate limit
2-86
clearing microflow policing rule 2-86
displaying policing information 2-954
mapping in-profile DSCPs changes when policed 2-473
resetting policed-dscp table to default 2-85
specifying excess rate and excess burst sizes 2-474
specifying microflow policing rule 2-474
R
RADIUS
clearing RADIUS server table
2-89
clearing RADIUS shared key 2-89
disabling accounting of normal login session 2-197
disabling accounting of system events 2-200
displaying RADIUS configuration parameters 2-962
enabling accounting of normal login session 2-197
enabling accounting of system events 2-200
enabling authentication 2-209
enabling primary authentication login method 2-211