Filter
Top Products
2-16
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Caution The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb
(22.7 kg) static weight.
To mount the access point on a vertical wall, follow these instructions:
Step 1 Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See
Figure 2-7 for the mounting bracket screw hole locations. You can optionally use the individual
mounting holes or the mounting slots.
Table 2-1 Material Needed to Mount the Mounting Bracket to a Vertical Wall
Materials Required In Kit
•
Ground lug and screws (provided with access point)
• Crimping tool for ground lug, Panduit CT-720 with
CD-720-1 die (http://onlinecatalog.panduit.com)
• Four M8 or 5/16 in. (31 mm) screws
• Four wall anchors (specified for wall material)
• Drill bit for wall anchors
• Electric drill and standard screwdriver
• #6-AWG ground wire
• Shielded outdoor-rated Ethernet (CAT5e or better) cable
• Grounding block
• Grounding rod
• 13-mm box-end wrench or socket set
Yes
No
No
No
No
No
No
No
No
No
No