Filter
Top Products
2-48
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Powering the Access Point
Figure 2-35 liquid-tight Adapter
Step 5 Insert the unterminated end of the Ethernet cable into the round end of the liquid-tight adapter (see
Figure 2-35), and pull several inches of cable through the adapter.
Step 6 Install an RJ-45 connector on the unterminated end of the Ethernet cable using your Ethernet cable
installation tool.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Statement 1023
Step 7 Carefully insert the RJ-45 cable connector into the Ethernet port opening on the access point, and
connect to the internal Ethernet connector (see Figure 2-36).
Figure 2-36 Inserting RJ-45 Connector into the Ethernet Port Opening in Case
1 Thread end 2 Round end
1 Liquid-tight adapter 3 RJ-45 connector
2 Ethernet port opening in access point case 4 Shielded outdoor-rated Ethernet (CAT5e or
better) cable