Filter
Top Products
2-34
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Tip When installing the 1552C or 1552CU access point using the pole mount kit, the grounding lug and cable
must be attached to the access point before attaching the access point to the mounting bracket.
Step 3 Attach the grounding lug and cable to the access point. Refer to “Grounding the Access Point” section
on page 2-41. See Figure 2-24.
Figure 2-24 Attaching Grounding Lug to Grounding Point
Step 4
Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see Figure 2-22). Do not
screw the bolt all the way in; leave approximately a 0.25 inch (0.635 cm) space.
1 Phillips head M4 x10mm screws (supplied
with pole mount kit)
2 Grounding lug
331581
1
2