Filter
Top Products
2-35
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-25 1552C Access Point Facing Up in Vault Location
Step 5
Position the two bolts on the access point into the quick mount notches on each side of the mounting
bracket (see Figure 2-23). Ensure that the hinged door is facing out.
Step 6 Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
point.
Step 7 Ensure that the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs
(17.6 to 20.3 Nm).
Step 8 For the 1552CU access point, continue with Installing Antennas, page 2-36. For the 1552C access point,
continue with Powering the Access Point, page 2-45.
1 M8 x16 bolt (supplied with pole mount kit) 3 F-connector
2 M8 x16 bolt (supplied with pole mount kit)
331582
3
2
1