Filter
Top Products
1-8
C7200 VSA (VPN Services Adapter) Installation and Configuration Guide
OL-9129-02
Chapter 1 Overview
Connectors
Figure 1-3 VSA LED
The following conditions must be met before the enabled LED goes on:
• The VSA is correctly connected to the backplane and receiving power.
• The system bus recognizes the VSA.
If either of these conditions is not met, or if the router initialization fails for other reasons, the enabled
LED does not go on.
Connectors
See Figure 1-2 for the VSA connectors.
Slot Locations
This section includes the following topics:
• Cisco 7204VXR Router, page 1-8
• Cisco 7206VXR Router, page 1-10
See Figure 1-4 for the slot numbering for the Cisco 7204VXR router.
See Figure 1-5 for the slot numbering for the Cisco 7206VXR router.
Cisco 7204VXR Router
The VSA is supported in the I/O controller port on the Cisco 7204VXR router (see 3 in Figure 1-4).
148995
C7200-VSA
LED
Table 1-6 VSA LED
Color State Function
No color Off Indicates that the VSA is disabled.
Green On Indicates the VSA is powered up and enabled for
operation.
Amber On Indicates VSA is booting or has encountered errors.
Yellow Powering Up Indicates that the VSA is powering up, but software
initialization has not started yet.