Filter
Top Products
CHAPTER
3-1
C7200 VSA (VPN Services Adapter) Installation and Configuration Guide
OL-9129-02
3
Removing and Installing the VSA
This chapter describes how to remove the C7200 VSA (VPN Services Adapter) from the supported
platforms and how to install a new or replacement VSA.
Before you begin installation, read Chapter 2, “Preparing for Installation” for a list of parts and tools
required for installation.
This chapter contains the following sections:
• Handling the VSA, page 3-1
• Online Insertion and Removal (OIR), page 3-2
• Warnings and Cautions, page 3-2
• VSA Removal and Installation, page 3-2
Note A system without an I/O controller or VSA, should have an empty slot to maintain the air flow.
The VSA circuit board is sensitive to ESD damage.
Handling the VSA
The VSA is a double-width circuit board mounted on a metal carrier. (see Figure 3-1).
Caution Always handle the VSA by the carrier edges and handle; never touch the VSA components or connector
pins. (See Figure 3-1.)
Figure 3-1 Handling the VSA
Printed circuit board
Metal carrier
H6419