Filter
Top Products
viii
C7200 VSA (VPN Services Adapter) Installation and Configuration Guide
OL-9129-02
Preface
Objectives
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. To see translations of the warnings that appear in
this publication, refer to the translated safety warnings that accompanied this device.
Note: SAVE THESE INSTRUCTIONS
Note: This documentation is to be used in conjunction with the specific product installation guide
that shipped with the product. Please refer to the Installation Guide, Configuration Guide, or other
enclosed additional documentation for further details.
Objectives
This document contains instructions and procedures for installing and configuring the C7200 VSA (VPN
Services Adapter), a double-width acceleration module supported on the Cisco 7204VXR and
Cisco 7206VXR routers with the NPE-G2 processor.
The part number for the VSA is C7200-VSA(=).
Note To ensure compliance with U.S. export laws and regulations, and to prevent future problems, see the
“Compliance with U.S. Export Laws and Regulations Regarding Encryption” section on page 2-5 for
specific, important information.
Organization
This document contains the following chapters:
Chapter Title Description
1
Overview Describes the VSA and VSA LED displays.
2
Preparing for Installation Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
3
Removing and Installing the VSA Describes the procedures for installing and removing
the VSA from the supported platform.
4
Configuring the VSA Describes procedures needed to configure the VSA in
the Cisco 7200VXR series routers.