Filter
Top Products
A
A-5 Troubleshooting
In Network Setup, when you configure the IPX (Novell) connection, the Fiery queries
the network for Novell file servers and trees, and attaches to them temporarily. If
a guest login is enabled, it is used. If not, you are prompted to log in from
Command WorkStation.
If the selected NetWare file server or tree does not have a guest account, or if the guest
account has expired or been disabled by the NetWare supervisor, you are prompted to
notify the IPX (Novell) administrator. In that case, there are two options:
• Enable a guest account on the NetWare server or tree for the purpose of setup.
• Log in with a different account. At the
ENTER LOGIN NAME screen, change the default
name (
guest) to supervisor or enter another valid login name. When you are
prompted for a password, enter the correct password for the account you named.
For any Novell error, make sure:
• Your IPX (Novell) network is connected to the Fiery.
• The NetWare server you are trying to access is running.
• The Novell network has been configured with at least one print server and queue for
the Fiery.
• You have the appropriate permissions and login information, including user name
and password, if necessary.
• The Fiery is configured with the correct frame types for communication with the
desired Novell servers.