Filter
Top Products
2
2-10 Setting up Network Servers
NetWare queue with the _print extension are sent to the Fiery Print queue. While a job
is processed and printed, a record of the job is being created. You can access the Job
Log containing these records at any time.
Configuring a NetWare server for printing
The following sections explain how to set up a NetWare file server so networked users
can print to the Fiery from their workstations, and the Fiery can obtain print jobs from
the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare installations, set up an NDS connection (see page 2-12).
• For NetWare in emulation mode, set the bindery context (see page 2-12).
• For NetWare in bindery emulation, set up a file server, print server, and print queue
for the Fiery (see page 2-13).
With bindery services, you can route all Fiery print jobs through the same NetWare file
server, or you can configure more than one file server to handle Fiery jobs.
The functions you perform on the Novell server, the Fiery, and the client workstation
are summarized in the following tables. The first table applies to NDS connections,
and the second to bindery connections. Complete the operations in the left column,
then the centre column, then the right column.