Filter
Top Products
20
Cisco Connected Grid Modules for CGR 1000 Series—WiMAX Installation and Configuration Guide
OL-26236-03
Configuring the Module
Step 1–WiMAX Scan-list Configuration
To create a scan-list, issue the following commands:
Router# configure terminal
Router(config)# wimax scan-list aaa
Router(config-scan-list)# channel index 1 frequency 2350000 bandwidth 10000
Router(config-scan-list)# nap id 00:00:01 priority 1 channel-index 1
Router(config-scan-list)# nsp id 00:00:01 home
• NAP (Network Access Provider)—The base station. It provides access to the NSPs which provides
network connectivity.
• NSP (Network Service Provider)—Provides network connectivity and access to NAPs.
• Maximum number of the number of frequencies: 1
Step 2–WiMAX Interface Configuration
To attach the scan-list to an interface, issue the following commands:
Router# configure terminal
Router(config)# interface wimax interface_name
Router(config-if)# no shutdown <-- THIS SHOULD BE SHUT
Router(config-if)# scan-list aaa
Router(config-if)# ip address dhcp
Router(config-if)# no shutdown
Step 3–Enable Security Parameters
To enable security parameters, follow these steps:
Step 1 Load the certificates onto the bootflash. Create a trustpoint and import the device certificate.
Router# configure terminal
Router(config)# crypto ca trustpoint device_cert_trustpoint
Router(config)# crypto ca import device_cert_trustpoint pkcs12 path password
Step 2 Create a trustpoint and import the server root certificate authority (CA) certificate.
Router(config)# crypto ca trustpoint server_root_CA_trustpoint
Router(config)# crypto ca import server_root_CA_trustpoint pkcs12 path password
Step 3 Configure the authentication method as EAP-TLS:
Router# configure terminal
Router(config)# interface wimax interface
Router(config-if)# pkm trustpoint server_root_ca server_root_CA_trustpoint
Router(config-if)# pkm auth-method eap-tls
Router(config-if)# pkm version pkm-v2
Router(config-if)# pkm trustpoint device device_cert_trustpoint <-- *
Router(config-if)# pkm trustpoint server_root_ca